These wires are with pre-crimped terminals. It comes in pack of 5pcs. The crimp connector housing is not included with the wires. You need to buy need to buy them separately.
These premium wires are stranded 26AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54mm) connectors. The 5pcs of 12″ (30 cm) wires.
By combining these wires with our crimp connector housings, you can quickly and easily create custom cables with 0.1″ (2.54mm) connectors that mate with various 0.1″-spaced connectors, including male and female headers and solderless breadboards. Just pick the housing for the correct number of pins, pick the colors and genders for your wires, and snap them into the housings . No soldering is required!
Note: It’s not easy to get the wires back out, so plan carefully!
You can easily make cable harnesses or assemblies that branch from one connector on one side to multiple connectors on the other (an example of this is shown in the picture to the right); you can also cut off one pre-crimped end and solder the wires directly to components to make swapping connections easy!